Sounds like a 'hybrid' SSHD device, will just show as a 1TB sata device, with the 128GB acting as a 'hidden' cache.
Hello all,
Recently I got an old Acer Aspire TC-780 (Win10), and, as I already got some RPi's, I thought of putting "Raspberry Pi Desktop" on it ( https://www.raspberrypi.com/software/operating-systems/ , at the bottom).
The TC-780 comes with, if I interpret the specs correctly, a combined HDD+SSD (1TB, 128GB).
I take it I just put the downloaded ISO onto a thumbdrive, plug it into the 'puter, boot from it and than follow the instructions to install the new OS.
My question is : are there any gotya's I should be aware of ? A specific BIOS configuration perhaps ? Anything else I should be aware of ?
Regards,
Rudy Wieser
On Fri, 11/20/2026 4:02 AM, R.Wieser wrote:
Hello all,
Recently I got an old Acer Aspire TC-780 (Win10), and, as I already got some >> RPi's, I thought of putting "Raspberry Pi Desktop" on it (
https://www.raspberrypi.com/software/operating-systems/ , at the bottom).
The TC-780 comes with, if I interpret the specs correctly, a combined
HDD+SSD (1TB, 128GB).
I take it I just put the downloaded ISO onto a thumbdrive, plug it into the >> 'puter, boot from it and than follow the instructions to install the new OS. >>
My question is : are there any gotya's I should be aware of ? A specific
BIOS configuration perhaps ? Anything else I should be aware of ?
Regards,
Rudy Wieser
You could boot into Win10, and use Disk Management (right-click Start and
it is in the menu), and you can look at the disk configuration and
orient yourself with respect to what the two devices are doing
right now. Like the 1TB drive could have a single partition saying "Data"
and the 128GB SSD could have a partition that ways "Windows".
You know how to poke around in there, and figure out the disk layout.
Then you can decide, what OS you want to install, and where is the
best place to install it.
Someone may have swapped used storage devices in place of the
original ones. In Win10, I would use something like "CrystalDiskInfo9_5_0.zip"
to check the SMART data on the SSD and determine what percentage of life is left on the drive. It's unlikely to be totally worn out, but you should
be checking the brand and model, because some older ones are a real
liability as storage (the first generation had some "drop dead" SSDs
that caused grief). It took a while for the industry to learn how to
write firmware for SSD drives. Intel staff, when they entered the
SSD business, they took one look at the code the other companies
were using, and they did an eye-roll, the code was so bad.
If *anything* in that box needs to be replaced, or if an item
was removed by the refurbisher to cheapen the item, these days
the replacement cost of just about any item inside that PC,
is going to cost you more than the entire purchase price of the
refurb. Now, more than ever, you're depending on the refurbisher
company to be an honest one.
Paul
Sounds like a 'hybrid' SSHD device, will just show as a 1TB sata device,
with the 128GB acting as a 'hidden' cache.
Nope, it's a desktop PC with a small SATA SSD for the OS and a regular magnetic HDD for storage.
Sounds like a 'hybrid' SSHD device,
will just show as a 1TB sata device, with the 128GB acting as a 'hidden' cache.
Tim,
Sounds like a 'hybrid' SSHD device, will just show as a 1TB sata device, >> with the 128GB acting as a 'hidden' cache.
Nope, it's a desktop PC with a small SATA SSD for the OS and a regular magnetic HDD for storage.
I think Andy is right in regard to the "hybrid SSHD device". Other than
the CD/DVD drive there seems to be only a single other device connected to
a SATA connector. I've also looked if there was perhaps a SSD module on
the motherboard itself, but could not find anything.
I'm not so sure that the SSD part will be a hidden chache though. The BIOS shows them (HDD, SSD) seperatily, so I'm assuming that I (read: Linux) can access them seperatily.
You could boot into Win10, and use Disk Management
You know how to poke around in there, and figure out the disk layout.
because some older ones are a real liability as storage (the first
generation had some "drop dead" SSDs that caused grief).
If *anything* in that box needs to be replaced, or if an item
was removed by the refurbisher to cheapen the item,
Paul,
You could boot into Win10, and use Disk Management
I can boot into Win10 alright, but than I'm shown a user-login screen.
Which I can't pass (?). So, no access to Disk Management either (?).
[Snip]I think Andy is right in regard to the "hybrid SSHD device". Other
than the CD/DVD drive there seems to be only a single other device
connected to a SATA connector. I've also looked if there was perhaps
a SSD module on the motherboard itself, but could not find anything.
It's supposed to be at the very front of the mobo - see number 9 here:
I'd install RPi OS on the 128GB drive and then you can mount the HDD
for user data later.
128GB should be plenty for installing apps and other
system stuff.
Theo,
I'd install RPi OS on the 128GB drive and then you can mount the HDD
for user data later.
Inclusive the swap partition ? I assumed that the HDD would be a better place for it.
128GB should be plenty for installing apps and other
system stuff.
:-) As an RPi can run on a 4GB micro-SD I must assume that 128GB is way, way, waaaay more than plenty for it.
On Fri, 20 Nov 2026 14:21:29 -0500, Paul wrote:
bcdedit /store C:\boot\BCD /set {bootmgr} displaybootmenu True
Slashes to the left of them! Slashes to the right of them! Foreslash! Backslash! Rah-rah-rah!
bcdedit /store C:\boot\BCD /set {bootmgr} displaybootmenu True
On 21/11/2026 12:15 am, R.Wieser wrote:
Paul,
You could boot into Win10, and use Disk Management
I can boot into Win10 alright, but than I'm shown a user-login screen.
Which I can't pass (?). So, no access to Disk Management either (?).
(in case you are unaware, I'm not a Win10 user. Other than *very*
superficially I have no idea how it works)
You know how to poke around in there, and figure out the disk layout.
Thats one of the gotya's I was thinking of : I'm accustomed to Windows
installations where I can delete and create partitions as part of the
installation process, but I've got no idea if Linux offers the same.
Last time I installed Linux (MGA V6 on my Laptop about 2009) as part of the Installation Process, it offered to Compact and Re-Partition the HardDrive Windows Drives, then I had it set up Partitions for Two Linux OSes, a 'SWAP' Partition and a 'Home' Partition where all my personal files would be stored.
Partition your HD such that you still have 'Work'/User' space spare for your Windows stuff .... then Partition the rest for Linux OS Partition (10-15GB'ish)/Swap Partition(how much RAM do you have?)/Home Partition(The Rest.).
On Sat, 11/21/2026 1:22 AM, Lawrence D?Oliveiro wrote:
It's a command line syntax. Just like when we put seven backslashes
On Fri, 20 Nov 2026 14:21:29 -0500, Paul wrote:
bcdedit /store C:\boot\BCD /set {bootmgr} displaybootmenu True
Slashes to the left of them! Slashes to the right of them!
Foreslash! Backslash! Rah-rah-rah!
in some thing we're writing, by "counting all the layers and
dividing by two". It's no different than that. Go to someone elses environment, learn the rules.
| Sysop: | Eric Oulashin |
|---|---|
| Location: | Beaverton, Oregon, USA |
| Users: | 121 |
| Nodes: | 16 (0 / 16) |
| Uptime: | 08:59:15 |
| Calls: | 9,717 |
| Files: | 9,607 |
| D/L today: |
220 files (58,879K bytes) |
| Messages: | 434,688 |