testing yet again...

---

[Psi-Jack -//- Decker]

* Origin: Decker's Heaven -//- bbs.deckersheaven.com (46:1/142)

Re: test 4
By: Psi-Jack to All on Sun Feb 22 2015 07:27 pm

testing yet again...

Finally! A simple binkd configuration issue, it was..

domain fidonet /binkd/outbound 1
domain agoranet /binkd/outbound 46

Doesn't work, that 46 had to be 1. :)

Thanks, prematurely, Nick. I think it was your posts in binkd that help me isolate that. :)

---

[Psi-Jack -//- Decker]

* Origin: Decker's Heaven -//- bbs.deckersheaven.com (46:1/142)

On 02/22/15, Psi-Jack said the following...

testing yet again...

I got it here.. Which is amazing because off what I am into...:)

|11·|03-|09─|01─╖ |15K|07í|08dd |01╓──|09·-|03· |11·
|01╙ |15W|07íck|08ed |01╙

---

Re: Re: test 4
By: Kidd Wicked to Psi-Jack on Sun Feb 22 2015 07:37 pm

On 02/22/15, Psi-Jack said the following...

testing yet again...

I got it here.. Which is amazing because off what I am into...:)

Heh, yeah. My binkd setup wasn't processing my outbound.02e, so anything for zone 46 was just staying.

---

[Psi-Jack -//- Decker]

* Origin: Decker's Heaven -//- bbs.deckersheaven.com (46:1/142)

Hello Psi-Jack,

On 22 Feb 15 19:37, Psi-Jack wrote to All:

testing yet again...

Finally! A simple binkd configuration issue, it was..

domain fidonet /binkd/outbound 1
domain agoranet /binkd/outbound 46

Doesn't work, that 46 had to be 1. :)

Thanks, prematurely, Nick. I think it was your posts in binkd that
help me isolate that. :)

---

[Psi-Jack -//- Decker]

* Origin: Decker's Heaven -//- bbs.deckersheaven.com (46:1/142)

Ahh yeah. Synchronet's sbbsecho is not 5D aware. :)

Regards,
Nick

--- GoldED+/LNX 1.1.5-b20130910
* Origin: thePharcyde_ telnet://bbs.pharcyde.org (Wisconsin) (46:1/701)

Re: Re: test 4
By: Accession to Psi-Jack on Sun Feb 22 2015 08:40 pm

Thanks, prematurely, Nick. I think it was your posts in binkd that
help me isolate that. :)

Ahh yeah. Synchronet's sbbsecho is not 5D aware. :)

heh, yeah. I don't remember why I changed that, but it's fixed now. I had Mystic setup as a point node, but mis keeps crashing on me, so it's never up more than 24 hours to the point it just totally fails every protocol. :/

---

[Psi-Jack -//- Decker]

* O

On 02/22/15, Psi-Jack said the following...

Finally! A simple binkd configuration issue, it was..

domain fidonet /binkd/outbound 1
domain agoranet /binkd/outbound 46

Doesn't work, that 46 had to be 1. :)

that's the main difference between 4D and 5D BSO operation... plus 5D would have a different directory name for each domain ;)

--- Mystic BBS v1.10 A57 (Windows)
* Origin: (46:1/132)

Re: Re: test 4
By: wkitty42 to Psi-Jack on Mon Feb 23 2015 03:30 am

Finally! A simple binkd configuration issue, it was..

domain fidonet /binkd/outbound 1
domain agoranet /binkd/outbound 46

Doesn't work, that 46 had to be 1. :)

that's the main difference between 4D and 5D BSO operation... plus 5D would have a different directory name for each domain ;)

Hmmm. Interesting. Then I've definitely never seen 5D actually work. :)

---

[Psi-Jack -//- D

On 02/22/15, Psi-Jack said the following...

Re: test 4
By: Psi-Jack to All on Sun Feb 22 2015 07:27 pm

testing yet again...

Finally! A simple binkd configuration issue, it was..

domain fidonet /binkd/outbound 1
domain agoranet /binkd/outbound 46

Doesn't work, that 46 had to be 1. :)

Thanks, prematurely, Nick. I think it was your posts in binkd that help
me isolate that. :)

---

[Psi-Jack -//- Decker]

* Origin: Decker's Heaven -//- bbs.deckersheaven.com (46:1/142)

What mail reader are you using? I don't see an origin line on any of your posts? Are you using Mystic? Or something different?

"No matter where you go, there you are!" - Buckaroo Bonzai

--- Mystic BBS v1.10 (Linux)
* Origin: Cyberia BBS | Cyberia.Darktech.Org | Kingwood, TX (46:1/116)

Re: Re: test 4
By: Gryphon to Psi-Jack on Mon Feb 23 2015 08:41 am

Thanks, prematurely, Nick. I think it was your posts in binkd that
help me isolate that. :)

---

[Psi-Jack -//- Decker]

* Origin: Decker's Heaven -//- bbs.deckersheaven.com (46:1/142)

What mail reader are you using? I don't see an origin line on any of your posts? Are you using Mystic? Or something different?

Hmmm? I see the origin line.. But yeah, I don't actually see the SBBSEcho tearline itself, which is a bit odd. :)

Anyway, Synchronet. The origin is there, but the tearline seems not to be there.

--- Mystic BBS v1.10 (Linux)
* Origin: Cyberia BBS | Cyberia.Darktech.Org | Kingwood, TX (46:1/116)

Lets see what happends next? :)

---

[Psi-Jack -//- Decker]

* Origin: Decker's Heaven -//- bbs.deckersheaven.com (46:1/142)

Hello Psi-Jack,

On 23 Feb 15 08:20, Psi-Jack wrote to wkitty42:

that's the main difference between 4D and 5D BSO operation...
plus 5D would have a different directory name for each domain ;)

Hmmm. Interesting. Then I've definitely never seen 5D actually work.
:)

Synchronet/sbbsecho doesn't support it, and probably never will. Though I do believe Mystic supports it. :)

Regards,
Nick

--- GoldED+/LNX 1.1.5-b20130910
* Origin: thePharcyde_ telnet://bbs.pharcyde.o

Hello Gryphon,

On 23 Feb 15 08:41, Gryphon wrote to Psi-Jack:

---

[Psi-Jack -//- Decker]

* Origin: Decker's Heaven -//- bbs.deckersheaven.com (46:1/142)

What mail reader are you using? I don't see an origin line on any of
your posts? Are you using Mystic? Or something different?

I see an origin line, as quoted above. It looks like he just modified the Synchronet or sbbsecho.c code to change the first line that usually says "SBBSEcho blah blah" or something.

Regards,
Nick

--- GoldED+/LNX 1.1.5-b20130910
* Origin: thePharcyde_ telnet://bbs.pharcyde.org (Wisconsin) (46:1/701)

Hmmm. Interesting. Then I've definitely never seen 5D actually work. :)

Synchronet/sbbsecho doesn't support it, and probably never will. Though
I do believe Mystic supports it. :)

I believe so. Everything here that goes to your node goes into

/mystic/echomail/out/agoranet.02e

Ttyl :-),
Al

--- Mystic BBS v1.10 (Linux)
* Origin: The Rusty MailBox - Penticton, B.C. Canada (46:1/161)

On 02/23/15, Psi-Jack said the following...

Re: Re: test 4
By: Gryphon to Psi-Jack on Mon Feb 23 2015 08:41 am

Thanks, prematurely, Nick. I think it was your posts in binkd that
help me isolate that. :)

---

[Psi-Jack -//- Decker]

* Origin: Decker's Heaven -//- bbs.deckersheaven.com (46:1/142)

What mail reader are you using? I don't see an origin line on any of posts? Are you using Mystic? Or something different?

Hmmm? I see the origin line.. But yeah, I don't actually see the SBBSEcho tearline itself, which is a bit odd. :)

Anyway, Synchronet. The origin is there, but the tearline seems not to be there.

--- Mystic BBS v1.10 (Linux)
* Origin: Cyberia BBS | Cyberia.Darktech.Org | Kingwood, TX (46:1/116

Lets see what happends next? :)

---

[Psi-Jack -//- Decker]

* Origin: Decker's Heaven -//- bbs.deckersheaven.com (46:1/142)

My Bad. I *meant* the tear line, not the origin line.

"No matter where you go, there you are!" - Buckaroo Bonzai

--- Mystic BBS v1.10 (Linux)
* Origin: Cyberia BBS | Cyberia.Darktech.Org | Kingwoo

Re: Re: test 4
By: Accession to Gryphon on Mon Feb 23 2015 09:22 am

What mail reader are you using? I don't see an origin line on any
of your posts? Are you using Mystic? Or something different?

I see an origin line, as quoted above. It looks like he just modified the Synchronet or sbbsecho.c code to change the first line that usually says "SBBSEcho blah blah" or something.

That or that was a big fix that was fixed and I just haven't updated my stuff yet. :)

---

[Psi-Jack -//- Decker]

* Origin: Decker's Heaven -//- bbs.deckersheaven.com (46:1/142)

Re: Re: test 4
By: Psi-Jack to Accession on Mon Feb 23 2015 12:21 pm

That or that was a big fix that was fixed and I just haven't updated my stuff yet. :)

Well, lets see what it does now.. Completely updated and rebuilt Synchronet.

---

[Psi-Jack -//- Decker]

* Origin: Decker's Heaven -//- bbs.deckersheaven.com (46:1/142)

Re: Re: test 4
By: Psi-Jack to Accession on Mon Feb 23 2015 02:21 pm

That or that was a big fix that was fixed and I just haven't updated
my stuff yet. :)

Well, lets see what it does now.. Completely updated and rebuilt Synchronet.

How about my signature having those three dashes, and a Synchronet bug? I just removed the dashes, to see if it exports/imports with a tearline. :)

[Psi-Jack -//- Decker]

--- SBBSecho 2.27-Linux
* Origin: Decker's Heaven -//- bbs

How about my signature having those three dashes, and a Synchronet bug? I just removed the dashes, to see if it exports/imports with a tearline. :)

[Psi-Jack -//- Decker]

--- SBBSecho 2.27-Linux
* Origin: Decker's Heaven -//- bbs.deckersheaven.com (46:1/142)

Haha! I found a Synchronet bug, with my own signature! :D

[Psi-Jack]

--- SBBSecho 2.27-Linux
* Origin: thePharcyde_ telnet://bbs.pharcyde.org (Wisconsin) (46:1/100)

Hello Al,

On 23 Feb 15 08:19, Al wrote to Accession:

Synchronet/sbbsecho doesn't support it, and probably never will.
Though I do believe Mystic supports it. :)

I believe so. Everything here that goes to your node goes into

/mystic/echomail/out/agoranet.02e

Sounds about right. Although I'm unsure as to if including the hex extension is
actually part of BSO's 5D implementation. I thought it would be just "agoranet"
as an outbound directory. Mystic may add on the hex extension to any network that is not the primary one though.

Mind you, I never really studied up on 5D since most of what I've used in the past hasn't supported it. In other words, I could very well be completely wrong
in my assumptions above. :)

Regards,
Nick

--- GoldED+/LNX 1.1.5-b20130910
* Origin: thePharcyde_ telnet://bbs.pharcyde.org (Wisconsin) (46:1/701)

Hello Psi-Jack,

On 23 Feb 15 12:21, Psi-Jack wrote to Accession:

I see an origin line, as quoted above. It looks like he just
modified the Synchronet or sbbsecho.c code to change the first
line that usually says "SBBSEcho blah blah" or something.

That or that was a big fix that was fixed and I just haven't updated
my stuff yet. :)

---

[Psi-Jack -//- Decker]

* Origin: Decker's Heaven -//- bbs.deckersheaven.com (46:1/142)

This is how it displays here. So while there's no information on the tearline (can you strip that in SCFG or echocfg/sbbsecho.cfg?), you have an added line with your name.. which may possibly be a signature?

Okay, since I talked to myself while writing this (lol crazy eh?) I'm guessing you have a signature setup with the 3 hyphens/dashes in it. With this done, I believe it merges your signature into the tearline with a specific option in echocfg.

If you were to change your signature to either only have two dashes, or none at
all.. it might indeed look completely different. I remember this because even Deuce's signature about duckduckgo replaces his tearline with this option set.

Basically the option truncates multiple tear/origin lines. I set that here awhile back because when QWK nodes would send something, you would see multiple
tear/origin lines (sometimes it got ridiculous, like 3-5 separate of each, and on a one line message reply, it would look fugly). I forget which option it is but there definitely is one, and I use it here. If you use it there it may be doing the same thing, but only on your system.

If you want to put that to the test, change your signature once to not include the 3 dashes and see if that drastically changes things. :)

Regards,
Nick

--- GoldED+/LNX 1.1.5-b20130910
* Origin: thePharcyde_ telnet://bbs.pharcyde.org (Wisconsin) (46:1/701)

Hello Psi-Jack,

On 23 Feb 15 14:21, Psi-Jack wrote to Accession:

Re: Re: test 4
By: Psi-Jack to Accession on Mon Feb 23 2015 12:21 pm

That or that was a big fix that was fixed and I just haven't
updated my stuff yet. :)

Well, lets see what it does now.. Completely updated and rebuilt Synchronet.

---

[Psi-Jack -//- Decker]

* Origin: Decker's Heaven -//- bbs.deckersheaven.com (46:1/142)

Same thing. I think it's due to your signature.

Regards,
Nick

--- GoldED+/LNX 1.1.5-b20130910
* Origin: thePharcyde_ telnet://bbs.pharcyde.org (Wisconsin) (46:1/701)

On 02/23/15, Psi-Jack said the following...

Haha! I found a Synchronet bug, with my own signature! :D

Looks like Synchronet saw those three dashes and saw them as a tearline and
so it didn't put another one.

Some OLRs like multimail do that too, and then the BBS doesn't put the usual tearline.

Ttyl :-),
Al

--- Mystic BBS v1.10 (Linux)
* Origin: The Rusty MailBox - Penticton, B.C. Canada (46:1/161)

On 02/23/15, Accession said the following...

I believe so. Everything here that goes to your node goes into

/mystic/echomail/out/agoranet.02e

Sounds about right. Although I'm unsure as to if including the hex extension is actually part of BSO's 5D implementation.

I think it is. I used to have connections in zone 2 and IIRC their stuff
would go into outbound.002 when the zone 1 stuff was just outbound. I don't have anything like that going on ATM so I can't check in real time.. :)

I thought it would be just "agoranet" as an outbound directory. Mystic
may add on the hex extension to any network that is not the primary one though.

The extention is calculated (somehow) from your primary address. If agoranet was all you had then there wouldn't be an extention.

Mind you, I never really studied up on 5D since most of what I've used
in the past hasn't supported it. In other words, I could very well be completely wrong in my assumptions above. :)

I've never studied it either so all the above is simply my assumptions of
what I have seen.

You almost need a map!

Ttyl :-),
Al

--- Mystic BBS v1.10 (Linux)
* Origin: The Rusty MailBox - Penticton,

Psi-Jack wrote to Accession <=-

Haha! I found a Synchronet bug, with my own signature! :D

[Psi-Jack]

--- SBBSecho 2.27-Linux
* Origin: thePharcyde_ telnet://bbs.pharcyde.org (Wisconsin)
(46:1/100)

I'm using MultiMail to reply. I just want to see what Mystic does about the tearline.

Not that it's important it just makes me wonder.. :)

Ttyl :-),
Al

... Thesaurus: ancient reptile with an excellent vocabulary
--- MultiMail/Linux v0.49

--- Mystic BBS/

Hello Al,

On 23 Feb 15 12:08, Al wrote to Accession:

Sounds about right. Although I'm unsure as to if including the
hex extension is actually part of BSO's 5D implementation.

I think it is. I used to have connections in zone 2 and IIRC their
stuff would go into outbound.002 when the zone 1 stuff was just
outbound. I don't have anything like that going on ATM so I can't
check in real time.. :)

Where I'm getting mixed up is that 4D will use the same outbound directory name, but will add the hex extension based on the zone number. ie:

/outbound (zone 1 if that's your primary address)
/outbound.002 (zone 2)
/outbound.02e (zone 46)

etc..

Whereas the FULL implementation of 5D would just take your domain as your outbound directory, ie:

/fidonet
/agoranet

etc.. BUT, since Fidonet has 4 zones, the other three would have hex extensions. Agoranet only having one zone number I didn't think would use a hex
extension because it's *only* for zone 46. *shrug*

I thought it would be just "agoranet" as an outbound directory.
Mystic may add on the hex extension to any network that is not
the primary one though.

The extention is calculated (somehow) from your primary address. If agoranet was all you had then there wouldn't be an extention.

The extension is calculated from your zone number of the said network. 02e is 46, which is Agoranet's zone. As for your "primary" address, that is the one that won't have any hex extension (in 4D anyways).

Mind you, I never really studied up on 5D since most of what I've
used in the past hasn't supported it. In other words, I could
very well be completely wrong in my assumptions above. :)

I've never studied it either so all the above is simply my assumptions
of what I have seen.

You almost need a map!

Agreed. But if I actually cared enough I would have found and read that map by now! :)

Regards,
Nick

--- GoldED+/LNX 1.1.5-b2

Hello Al,

On 23 Feb 15 12:22, Al wrote to Psi-Jack:

I'm using MultiMail to reply. I just want to see what Mystic does
about the tearline.

Not that it's important it just makes me wonder.. :)

Ttyl :-),
Al

... Thesaurus: ancient reptile with an excellent vocabulary
--- MultiMail/Linux v0.49

--- Mystic BBS/QWK v1.10 (Linux)
* Origin: The Rusty MailBox - Penticton, B.C. Canada (46:1/161)

Both Multimail and Mystic add their own tearline. You might be able to disable it in Multimail to only use the Mystic/QWK one though, if you really wanted to.
:)

Regards,
Nick

--- GoldED+/LNX 1.1.5-b20130910
* Origin: thePharcyde_ telnet://bbs.pharcyde.org (Wisconsin) (46:1/701)

Hello Psi-Jack,

On 23 Feb 15 13:28, Psi-Jack wrote to Accession:

How about my signature having those three dashes, and a
Synchronet bug? I just removed the dashes, to see if it
exports/imports with a tearline. :)

[Psi-Jack -//- Decker]

--- SBBSecho 2.27-Linux
* Origin: Decker's Heaven -//- bbs.deckersheaven.com (46:1/142)

Haha! I found a Synchronet bug, with my own signature! :D

[Psi-Jack]

--- SBBSecho 2.27-Linux
* Origin: thePharcyde_ telnet://bbs.pharcyde.org (Wisconsin)
(46:1/100)

Oddly enough, I don't think that's a bug, but set via an option to do that or not. I believe it was intended to be that way.

Regards,
Nick

--- GoldED+/LNX 1.1.5-b20130910
* Origin

On 02-23-15 14:25, Psi-Jack wrote to Accession <=-

Re: Re: test 4
By: Psi-Jack to Accession on Mon Feb 23 2015 02:21 pm

That or that was a big fix that was fixed and I just haven't updated
my stuff yet. :)

Well, lets see what it does now.. Completely updated and rebuilt Synchronet.

How about my signature having those three dashes, and a Synchronet bug?
I just removed the dashes, to see if it exports/imports with a
tearline. :)

[Psi-Jack -//- Decker]

--- SBBSecho 2.27-Linux
* Origin: Decker's Heaven -//- bbs.deckersheaven.com (46:1/142)

In echocfg, under Toggle, see if you have convert existing tearlines to yes...


--

Bill

Telnet: tequilamockingbirdonline.net
Web: bbs.tequilamockingbirdonline.net
FTP: ftp.tequilamockingbirdonline.net:2121
IRC: irc.tequilamockingbirdonline.net Ports: 6661-6670 SSL: +6697
Radio: radio.tequilamockingbirdonline.net:8010/live


... Look Twice... Save a Life!!! Motorcycles are Everywhere!!!
=== MultiMail/Win32 v0.50
--- SBBSecho 2.27-Win32
* Origin: TequilaMockingbird Online, Toms River NJ (46:1/159)

Re: test 4
By: Al to Psi-Jack on Mon Feb 23 2015 12:22 pm

I'm using MultiMail to reply. I just want to see what Mystic does about the tearline.

Not that it's important it just makes me wonder.. :)

Ttyl :-),
Al

... Thesaurus: ancient reptile with an excellent vocabulary
--- MultiMail/Linux v0.49

--- Mystic BBS/QWK v1.10 (Linux)
* Origin: The Rusty MailBox - Penticton, B.C. Canada (46:1/161)

heh, Mystic adds it's own tear line, regardless that one exists already. :>

[Psi-Jack -//- Decker]

--- SBBSecho 2.27-Linux
* Origin: Decker's Heaven -//- bbs.deckersheaven.com (46:1/142)

Re: Re: test 4
By: Accession to Psi-Jack on Mon Feb 23 2015 02:51 pm

Haha! I found a Synchronet bug, with my own signature! :D

[Psi-Jack]

Oddly enough, I don't think that's a bug, but set via an option to do that or not. I believe it was intended to be that way.

Hmmm, well, I don't /see/ any option in my sbbsecho.cfg that resembles that kind of functionality... Then again, the sbbsecho docs are a little ... Minimal... And based mostly around echocfg.

[Psi-Jack -//- Decker]

--- SBBSecho 2.27-Linux
* Origin: Decker's Heaven -//- bbs.deckersheaven.com (46:1/142)

Re: Re: test 4
By: Bill McGarrity to Psi-Jack on Mon Feb 23 2015 04:04 pm

In echocfg, under Toggle, see if you have convert existing tearlines to yes...

Well, mine is set to No. :)

[Psi-Jack -//- Decker]

--- SBBSecho 2.27-Li

Hello Psi-Jack,

On 23 Feb 15 17:03, Psi-Jack wrote to Bill McGarrity:

Re: Re: test 4
By: Bill McGarrity to Psi-Jack on Mon Feb 23 2015 04:04 pm

In echocfg, under Toggle, see if you have convert existing
tearlines to yes...

Well, mine is set to No. :)

[Psi-Jack -//- Decker]

--- SBBSecho 2.27-Linux
* Origin: Decker's Heaven -//- bbs.deckersheaven.com (46:1/142)

Was that what you recently just toggled to No in order to regain your SBBSecho tearline?

Regards,
Nick

--- GoldED+/LNX 1.1.5-b20130910
* Origin: thePharcyde_ telnet://bbs.pharcyde.org (Wisconsin) (46:1/701)

Re: Re: test 4
By: Accession to Psi-Jack on Mon Feb 23 2015 04:12 pm

In echocfg, under Toggle, see if you have convert existing
tearlines to yes...

Well, mine is set to No. :)

Was that what you recently just toggled to No in order to regain your SBBSecho tearline?

No. Hopefully this time my reply comes through without crashing synchronet. 2 SIGV's in a row just replying to this exact message..

Anyway, turning that option replaces the tearline's 3 dashes with 3 equals, and still adds its own.

[Psi-Jack -//- Decker]

--- SBBSecho 2.27-Linux
* Origin: Decker's Heaven -//- bbs.deckersheaven.com (46:1/142)

On 02/23/15, Psi-Jack said the following...

domain fidonet /binkd/outbound 1
domain agoranet /binkd/outbound 46

Doesn't work, that 46 had to be 1. :)

that's the main difference between 4D and 5D BSO operation... plus 5D would have a different directory name for each domain ;)

Hmmm. Interesting. Then I've definitely never seen 5D actually work. :)

most haven't... that's because the older software only does 4D... here's an example (from a live binkd system) of 5D... this also uses the alternative binkd dns server format because each ftn domain should have their own dns server for converting and looking up their addresses in f.n.z@domain if it is used...

domain x:\\binkd\\outbound\\fidonet 1 binkp.net
domain x:\\binkd\\outbound\\foobar 85 foobar.net
domain x:\\binkd\\outbound\\zaria 98 zaria.net

each domain's outbound is stored in their own directory instead of all in one... the above directory tree looks like

...\outbound\fidonet # for fidonet Z1
...\outbound\fidonet.002 # for fidonet Z2
...\outbound\fidonet.003 # for fidonet Z3
...\outbound\foobar # for foobar Z85
...\outbound\foobar.056 # for foobar Z86
...\outbound\zaria # for zaria Z98
...\outbound\zaria.063 # for zaria Z99

it can get very interesting if there're two or more ftn's using the same zone number... in the other BSO forms, mail may get mixed up if there's duplicate net and node numbers in each ftn... the whole thing requires that all BSO
using software also supports 5D... if there's one that doesn't the whole shooting match is lost...

something else to note is what zone is claimed as your "home zone"... in 5D, each domain has its "home zone"... in the lesser ones, there's only one... in the others, if one claims fidonet Z2 as their "home zone", then the second fidonet directory above would be fidonet.001 and the first one would be for their zone 2 mail...

it is an interesting format, to be sure... however, i much prefer the dynamic format that FD uses where there's only one outbound and things are named in a specific manner for each zone:net/node.point@domain... i forget those details but i have a script for use with 4DOS/4OS2/4NT that uses the description capabilities and describes the outbound mail with the sysop and address so i can see which is which with a simple dir command ;) can't so that so easily
in BSO but it probably isn't too important these days, either...

--- Mystic BBS v1.10 A57 (Windows)
* Origin: (46:1/132)

On 02/23/15, Gryphon said the following...

On 02/22/15, Psi-Jack said the following...

[...]

---

[Psi-Jack -//- Decker]

* Origin: Decker's Heaven -//- bbs.deckersheaven.com (46:1/142)

What mail reader are you using? I don't see an origin line on any of
your posts? Are you using Mystic? Or something different?

hunh? looks like you quoted his origin line above... am i missing something?

--- Mystic BBS v1.10 A57 (Windows)
* Origin:

On 02/23/15, Psi-Jack said the following...

Hmmm? I see the origin line.. But yeah, I don't actually see the SBBSEcho tearline itself, which is a bit odd. :)

Anyway, Synchronet. The origin is there, but the tearline seems not to be there.

your posts have a sbbsecho TID control line so there shouldn't be a bragging tear line for sbbsecho...

--- Mystic BBS v1.10 A57 (Windows)
* Origin: (46:1/132)

On 02/23/15, Psi-Jack said the following...

[Psi-Jack -//- Decker]

--- SBBSecho 2.27-Linux
* Origin: Decker's Heaven -//- bbs.deckersheaven.com (46:1/142)

Haha! I found a Synchronet bug, with my own signature! :D

actually, it shouldn't be a bug... there was already a tear line so there should not have been another one added... plus if there's a TID for the
tosser, there should not be any tosser bragging on the tear line...

BTW: a tear line is three dashes and a space not just three dashes ;)

--- Mystic BBS v1.10 A57 (Windows)
* Origin: (46:1/132)

On 02/23/15, Al said the following...

The extention is calculated (somehow) from your primary address. If agoranet was all you had then there wouldn't be an extention.

BSO directory extensions are the zone number in HEX left-padded with zeros
to three places... just like the ?lo and mo1, tu2 archived mail bundles are named with the destination's net in HEX left-padded with zeros to four places plus the destination's node in HEX left-padded with zeros to four places...

eg: outbound.02e/00010064.clo # crash flo file to 46:1/100
# 02e is decimal 46
# 0001 is decimal 1
# 0064 is decimal 100

--- Mystic BBS v1.10 A57 (Windows)
*

On 02/23/15, Accession said the following...

Where I'm getting mixed up is that 4D will use the same outbound
directory name, but will add the hex extension based on the zone number. ie:

/outbound (zone 1 if that's your primary address)
/outbound.002 (zone 2)
/outbound.02e (zone 46)

etc..

Whereas the FULL implementation of 5D would just take your domain as your outbound directory, ie:

/fidonet
/agoranet

etc.. BUT, since Fidonet has 4 zones, the other three would have hex extensions. Agoranet only having one zone number I didn't think would
use a hex extension because it's *only* for zone 46. *shrug*

this is all correct ;)

Agreed. But if I actually cared enough I would have found and read that map by now! :)

believe it or not but it is in the original binkleyterm documentation... i suspect it may also be in the original opus docs if anyone can find opus
these days... opus is where BSO started and the binkleyterm came along and
used the same format... i think the programers of both were the same...
anyway, BSO later gots its name from binkleyterm and opus was left out...

--- Mystic BBS v1.10 A57 (Windows)
* Orig

On 02/23/15, Psi-Jack said the following...

Oddly enough, I don't think that's a bug, but set via an option to do or not. I believe it was intended to be that way.

Hmmm, well, I don't /see/ any option in my sbbsecho.cfg that resembles that kind of functionality... Then again, the sbbsecho docs are a little ... Minimal... And based mostly around echocfg.

i think it is an option per echo and not global or network based... it has
been a while since i rooted around in max's sbbs configs...

--- Mystic BBS v1.10 A57 (Windows)
* Origin: (46:1/132)

Re: Re: test 4
By: wkitty42 to Psi-Jack on Tue Feb 24 2015 02:36 pm

[Psi-Jack -//- Decker]

--- SBBSecho 2.27-Linux
* Origin: Decker's Heaven -//- bbs.deckersheaven.com (46:1/142)

Haha! I found a Synchronet bug, with my own signature! :D

actually, it shouldn't be a bug... there was already a tear line so there should not have been another one added... plus if there's a TID for the tosser, there should not be any tosser bragging on the tear line...

BTW: a tear line is three dashes and a space not just three dashes ;)

heh, well, then it is definitely a bug! Heh. My signature had only just the three dashes and a newline, no space, no text, newline had the text for my actual signature. Kinda funky, regardless, that it thought my signature was a tearline. :)

[Psi-Jack -//- Decker]

--- SBBSecho 2.27-Linux
* Origin: Decker's Heaven -//- bbs.deckersheaven.com (46:1/142)

Psi-Jack wrote to Accession <=-

Haha! I found a Synchronet bug, with my own signature! :D

[Psi-Jack]

--- SBBSecho 2.27-Linux
* Origin: thePharcyde_ telnet://bbs.pharcyde.org (Wisconsin)
(46:1/100)

I'm using MultiMail to reply. I just want to see what Mystic does about the tearline.

Not that it's important it just makes me wonder.. :)

Ttyl :-),
Al

... Thesaurus: ancient reptile with an excellent vocabulary
--- MultiMail/Linux v0.49

--- Mystic BBS/QWK v1.10 (Linux)
# Origin: The Rusty MailBox - Penticton, B.C. Canada (46:1/161)
# Origin: thePharcyde_ telnet://bbs.pharcyde.org (Wisconsin) (46:1/100)
* Origin: Battlestar BBS : battlestarbbs.dyndns.org (46:1/164)